Product specifications

Products category:
EBS-6000/EBS-7000 Series Industrial INK-JET Printers (CIJ, SCP)

Product name:
INK-JET EBS-6600/16 (or /25 or /32)





The low investment printer for common applications



EBS-6600 is an industrial single-head INK-JET printer designed for labeling of objects moving on a factory conveyor without requiring direct contact. Prints are produced with colored dye-based inks, i.e. homogenous non-pigment inks. The feature that differentiates this printer from others is the fact that it does not need to be supplied from a compressed air system.

Printers on offer differ in maximum print height (MPH, the maximum height of a vertical row) which can be 16 or 25 or 32 dots.



Out of a wide range of printer capabilities, only the most important ones are specified below:


ACPS - Anti Clogging Power Supply
Worldwide innovation: for the first time in a Continuous Ink Jet Printer: a built-in automatic, intelligent system for reliable printer operation in case of power failure. Should the power be interrupted for less than 30 seconds, the printer continues operating. If the supply is cut off for more than 30 seconds, the printer starts the automatic shutdown procedure including rinsing, to protect the tubes from dried ink deposits. As soon as the power is restored the printer is quickly operational. The ACPS contains very long-lasting Super Charger Capacitors, not conventional accumulators. Charging lasts only around 2 minutes. The ACPS is available optionally.
Ecological and efficient
Environmentally friendly - the undisputed feature of the BOLTMARK II series printers. An extremely low power consumption (only 19 watts) creates a new quality in the CIJ printers segment. Low consumption of consumables provides BOLTMARK II series printers with a leading position among eco-friendly marking devices.
Very simple-changing of consumables & iModule
The EBS BOLTMARK II series is fitted with an integrated ink system, which can be changed in 3 simple steps in less than a minute: Open the flap, remove used iModule®, insert new iModule® – done! No technician and no tools needed. Equally, the quick change of ink and solvent bottles works in the same way. No interruption of printing, no unscrewing of the bottle cap and no dirty fingers: Remove the used bottle, insert the new one – click!
Protection class IP55 and IP65
IP55 available as standard or IP65 (optionally available) according to EN 60529 - high protection grade of the housing against intrusion of water and dust guarantees high reliability of the printer over a long period. Keypad, display and connectors are protected against chemicals and water spray.



Remote control & printer administration - my.ebs.ink


Get connected from anywhere in the world to your printer via an Ethernet network and operate it via Web browser. Via the portal “my.ebs.ink” you can access the settings of the printer desktop from anywhere, manage and store printing processes, status reports and check the level of consumables, as well as show error diagnoses.

Parameter Value

Physical properties
Housing stainless steel
Housing dimensions width: 300 mm,
height: 458 mm,
depth: 211 mm.
Printhead dimensions straight: diameter Ø 40 mm, length 199 mm
Weight about 12.5 kg without fluids
IP Protection class Printer casing (excluding the printhead):
IP55 (standard),
IP65 (an option; with external air supply).

Technical data *)
Number of print-heads 1
Printer position during printing vertical
Printhead position during printing any
Head cable ‑ head cable length: 3m,
‑ minimum cable bend radius:
75mm for static operation,
150mm for dynamic operation.
Distance from the printhead to an object from 0 to 30 mm
Connections - USB, current efficiency 300 mA,
ETHERNET,
PHOTO: photodetector input,
SHAFT: shaft-encoder input,
‑ optional connections (e.g. RS-232).
Terminal a built-in terminal equipped with an air tight, splash proof, chemicals resistant alphanumerical keyboard and a big touch control LCD (touch screen)

Working conditions
Environment ‑ working temperature
from +5 to +40ºC (from +41 to +104ºF), for static operation,
from +15 to +40ºC (from +59 to +104ºF) for dynamic operation.
‑ relative humidity: to 90% without condensation.
Acceptable exposure to vibration and impacts ‑ vibration: max.: 1 g, max. 10 Hz.
‑ shocks: max. 1 g, max. 2 ms.
Power supply ‑ supply voltage: 100 ‑ 240 VAC, 50/60 Hz.
‑ max. current consumption (in normal working conditions): 0.6 ‑ 0.2 A.
Compressed air supply not required!!!
Required inactive time none; the device can run uninterruptedly for 24 hours

Specifications *)
Print height from 1 to 16 mm
Maximum print height
(MPH, the maximum height of a vertical row)
16 (or optionally 25 or 32) dots.
Maximum number of texts 100 (standard).
‑ about 1000, about 2000 (options).
Graphics ‑ edited with graphics editor.
‑ its maximum height is determined by a selected text profile.

Consumables
Type of ink non‑pigment, based on methyl-ethyl ketone or ethanol
Ink color multicolor, provided that ink of one type only is used
*) note - the manufacturer reserves that: the range of available features, options and printer parameters may vary and depend on the option you have negotiated
Parameter Value

Physical properties
Housing stainless steel
Housing dimensions width: 300 mm,
height: 458 mm,
depth: 211 mm.
Printhead dimensions straight: diameter Ø 40 mm, length 199 mm
LCD dimensions 5.7”/144.8 mm
Weight about 12.5 kg without fluids
IP Protection class Printer casing (excluding the printhead):
IP55 (standard),
IP65 (an option; with external air supply).
Feeder cable length 2.2 mm

Technical data *)
Number of print-heads 1
Printer position during printing vertical
Printhead position during printing any
Head cable ‑ head cable length: 3m,
‑ minimum cable bend radius:
75mm for static operation,
150mm for dynamic operation.
Distance from the printhead to an object from 0 to 30 mm
Connections - USB, current efficiency 300 mA,
ETHERNET,
PHOTO: photodetector input,
SHAFT: shaft-encoder input,
‑ optional connections (e.g. RS-232).
Terminal a built-in terminal equipped with an air tight, splash proof, chemicals resistant alphanumerical keyboard and a big touch control LCD (touch screen)
Print release photodetector
other detectors can be connected, if required by a user
Timing of print columns ‑ internal generator,
‑ shaft-encoder.

Working conditions
Environment ‑ working temperature
from +5 to +40ºC (from +41 to +104ºF), for static operation,
from +15 to +40ºC (from +59 to +104ºF) for dynamic operation.
‑ relative humidity: to 90% without condensation.
Acceptable exposure to vibration and impacts ‑ vibration: max.: 1 g, max. 10 Hz.
‑ shocks: max. 1 g, max. 2 ms.
Power supply ‑ supply voltage: 100 ‑ 240 VAC, 50/60 Hz.
‑ max. current consumption (in normal working conditions): 0.6 ‑ 0.2 A.
Compressed air supply not required!!!
Required inactive time none; the device can run uninterruptedly for 24 hours

Specifications *)
Print height from 1 to 16 mm
Maximum print height
(MPH, the maximum height of a vertical row)
16 (or optionally 25 or 32) dots.
Maximum number of texts 100 (standard).
‑ about 1000, about 2000 (options).
Types of subtexts CHARACTER STRING,
GRAPHICS,
BAR CODE,
TEXT NAME.

Subtexts whose contents are:
‑ static,
‑ dynamic (so called special registers: counters, date, expiration date, time, shift identifier, external data, variable field, text contents).
Character matrices ‑ Latin: 5x5, 7x4, 7x5, 9x5, 9x7, 11x7, 12x6, 12x7, 14x9, 16x9, 16x10, 16x14, 21x15, 25x15, 32x18 and any combination of the a/m matrices can be used within the restrictions imposed by a selected text profile.
(including national characters: German, Polish, Danish, Spanish, Swedish, Turkish, Portuguese, Greek, Czech, Slovak),
‑ Cyrillic: 5x5, 7x6, 9x7, 12x7, 12x9, 16x10, 25x19, 32x24 (including Ukrainian, Kazakh characters),
‑ Arabic,
‑ special,
‑ Armenian,
‑ Japanese,
‑ Chinese.
Bar codes ‑ 1-dimensional (1D) codes: Datalogic, Matrix, 2/5 5 Bars, 2/5 IATA, Interleaved, Code 39, EAN‑8, EAN‑13, EAN‑13 +EAN5, UPC‑A, UPC‑A EBS, UPC‑E, Kod 128, EAN‑128, Kod 128B, ITF8, ITF14.
‑ 2-dimensional (2D) code: Data Matrix ECC‑200 (an option).
Graphics ‑ edited with graphics editor.
‑ its maximum height is determined by a selected text profile.
Maximum printing speed 5x5 matrix
(for printing parameter: Speed Level = FAST)
‑ 1 line 5x5 + 1-column space between characters:
2083 characters/s (500 m/min at 15 dots/cm, ”5”).
‑ 2 lines 5x5 + 1-column space between characters:
1889 characters/s (170 m/min at 20 dots/cm. ”11”).
‑ 3 lines 5x5 + 1-column space between characters:
974 characters/s (33.4 m/min at 35 dots/cm, ”3x7SF*”).
‑ 4 lines 5x5 + 1-column space between characters:
833 characters/s (30 m/min at 25 dots/cm, ”25”).
‑ 5 lines 5x5 + 1-column space between characters:
525 characters/s (10.8 m/min at 35 dots/cm, ”32SF”).
* „SF” stands for super fast profile
Maximum printing speed 7x4 matrix
(for printing parameter: Speed Level = FAST)
‑ 1 line 7x4 + 1-column space between characters:
1785 characters/s (357 m/min at 15 dots/cm, ”7”).
‑ 2 lines 7x4 + 1-column space between characters:
1467 characters/s (110 m/min at 20 dots/cm, ”16SF*”).
‑3 lines 7x4 + 1-column space between characters:
1169 characters/s (33.4 m/min at 35 dots/cm, ”3x7SF”).
‑ 4 lines 7x4 + 1-column space between characters:
779 characters/s (16.7 m/min at 35 dots/cm, ”4x7”).
* „SF” stands for super fast profile
Maximum printing speed 11x7 matrix
(for printing parameter: Speed Level = FAST)
‑ 1 line 11x7 + 1-column space between characters:
708 characters/s (170 m/min at 20 dots/cm, ”11”).
‑ 2 lines 11x7 + 1-column space between characters:
313 characters/s (30 m/min at 25 dots/cm, ”2x11”).
Maximum printing speed 16x9 matrix
(for printing parameter: Speed Level = FAST)
‑ 1 line 16x9 + 1-column space between characters:
367 characters/s (110 m/min at 20 dots/cm, ”16SF*”).
* „SF” stands for super fast profile
Maximum printing speed 25x15 matrix
(for printing parameter: Speed Level = FAST)
‑ 1 line 25x15 + 1-column space between characters:
78 characters/s (30 m/min at 25 dots/cm, ”25”).
Maximum printing speed 32x18 matrix
(for printing parameter: Speed Level = FAST)
‑ 1 line 32x18 + 1-column space between characters:
33 characters/s (10.8 m/min at 35 dots/cm, ”32SF”*”).
* „SF” stands for super fast profile

Consumables
Type of ink non‑pigment, based on methyl-ethyl ketone or ethanol
Ink color multicolor, provided that ink of one type only is used
*) note - the manufacturer reserves that: the range of available features, options and printer parameters may vary and depend on the option you have negotiated
No. Description Files to download
1 User Manual for the BOLTMARK® II -series Printers.
Separate languages versions:
English, 2017/11/09#2.0EN.
German, 2017/11/09#2.0DE.
Polish, 2017/11/09#2.0PL.
Spanish, 2017/11/09#2.0ES.
Italian, 2017/11/09#2.0IT.
Russian, 2017/11/09#2.0RU.
French, 2017/11/09#2.0FR.
Turkish, 2017/11/09#2.0TR.
Chinese, 2017/11/09#2.0ZH.
The Manuals are provided in the PDF file format.

This editions of the document include most of the changes introduced to the EBS printers for software version 37_0B and the descriptions contained therein correspond to the printers that are equipped with this software version.
Number of files: 9
2 Basic Operating Instructions for the BOLTMARK® II -series Printers.
Separate languages versions:
English, 2018/02/27#2.0EN.
Polish, 2018/02/27#2.0PL.
Czech, 2018/02/27#2.0CS.
Portuguese, 2018/02/27#2.0PT.
Romanian, 2018/02/27#2.0RO.
Danish, 2018/02/27#2.0DA.
Dutch, 2018/02/27#2.0NL.
The Manuals are provided in the PDF file format.

This editions of the document include most of the changes introduced to the EBS printers for software version 37_1A and the descriptions contained therein correspond to the printers that are equipped with this software version.
Number of files: 7
3
BOLTMARK® II series Printers brochure.
English language version, PDF-format file.
Number of files: 1

In order to view the PDF files, that are available on our website, we recommend to install Adobe® Reader® on your computer. This is available for FREE and you can download it from the Adobe web site by clicking here >>>

See also: Service documents, drawings and software