Product specifications

Products category:
EBS-6000/EBS-7000 Series Industrial INK-JET Printers (CIJ, SCP)

Product name:
INK-JET EBS-6800P/16 (or /25 or /32)






The all-round pigment ink printer with full printing options



EBS-6800P is an industrial single-head INK-JET printer designed for labeling of objects moving on a factory conveyor without requiring direct contact. Prints are produced with colored pigment-based inks. The feature that differentiates this printer from others is the fact that it does not need to be supplied from a compressed air system.

Printers on offer differ in maximum print height (MPH, the maximum height of a vertical row) which can be 16, 25 or 32 dots.



Out of a wide range of printer capabilities, only the most important ones are specified below:
Contrast overprint
The pigment inks used in our printers, such as white or yellow ink, allow print on a variety of dark substrates. Other inks, such as green or blue ink, allow high contrast and good coverage overprint of any surfaces, also work well on multi-colored substrates.
Efficiency and durability of printing
EBS pigment inks have excellent adhesion to many difficult surfaces, while retaining the durability required by many applications. Excellent for printing on cables, rubber hoses and plastic articles, insulating sleeves, and also on all other surfaces where the use of homogeneous (non-pigment) inks gives unsatisfactory intensity and contrast.
Very simple-changing of consumables & iModuleŸ
The EBS-6800P printer is fitted with an integrated ink system, which can be changed in 3 simple steps in less than a minute: Open the flap, remove used iModule®, insert new iModule® – done! No technician and no tools needed. Equally, the quick change of ink and solvent bottles works in the same way. No interruption of printing, no unscrewing of the bottle cap and no dirty fingers: Remove the used bottle, insert the new one – click!
Ecological and efficient
Environmentally friendly - the undisputed feature of the EBS-6800P BOLTMARK® I series printer. An extremely low power consumption (only 22 watts) creates a new quality in the CIJ printers segment. Low consumption of consumables provides EBS-6800P printer with a leading position among eco-friendly marking devices.



Remote control - my.ebs.ink


Get connected from anywhere in the world to your printer via an Ethernet network and operate it via Web browser. Via the portal “my.ebs.ink” you can store projects, access diagnoses, status reports and check the level of consumables.

Parameter Value

Physical properties
Housing stainless steel
Housing dimensions width: 300 mm,
height: 470 mm,
depth: 211 mm.
Printhead dimensions - straight:
  diameter Ø 40 mm, length 198 mm
- angular (option):
  diameter Ø 40 mm, length 127 mm, height 130 mm
LCD dimensions 5.7”/144.8 mm
Weight about 13.8 kg without fluids
IP Protection class Printer casing (excluding the printhead):
IP44 (standard),
IP54 (option).
Feeder cable length 2.2 m

Technical data *)
Number of print-heads 1
Printer position during printing vertical
Printhead position during printing any
Head cable ‑ head cable length: 3m,
‑ minimum cable bend radius:
75mm for static operation,
150mm for dynamic operation.
Distance from the printhead to an object from 0 to 30 mm
Connections - USB,
ETHERNET,
PHOTO: photodetector input,
SHAFT: shaft-encoder input,
‑ optional connections (e.g. RS-232).
Terminal a built-in terminal equipped with an air tight, splash proof, chemicals resistant alphanumerical keyboard and a big touch control LCD (touch screen)
Print release photodetector
other detectors can be connected, if required by a user
Timing of print columns ‑ internal generator,
‑ shaft-encoder.

Working conditions
Environment ‑ working temperature
from +5 to +40ºC (from +41 to +104ºF), for static operation,
from +15 to +40ºC (from +59 to +104ºF) for dynamic operation.
‑ relative humidity: to 90% without condensation.
Acceptable exposure to vibration and impacts ‑ vibration: max.: 1 g, max. 10 Hz.
‑ shocks: max. 1 g, max. 2 ms.
Power supply ‑ supply voltage: 100 ‑ 240 VAC, 50/60 Hz.
‑ max. current consumption (in normal working conditions): 0.65 ‑ 0.3 A.
Compressed air supply not required!!!
Required inactive time none; the device can run uninterruptedly for 24 hours

Specifications
Print height from 1.4 to 12 mm
Maximum print height
(MPH, the maximum height of a vertical row)
16 (or optionally 25 or 32) dots
Maximum number of texts ‑ about 1000 (standard).
‑ about 2000 (option).
Types of subtexts CHARACTER STRING,
GRAPHICS,
BAR CODE,
TEXT NAME.

Subtexts whose contents are:
‑ static,
‑ dynamic (so called special registers: counters, date, expiration date, time, shift identifier, external data, variable field, text contents).
Character matrices ‑Latin: 5x5, 7x4, 7x5, 9x5, 9x7, 11x7, 12x6, 12x7, 14x9, 16x9, 16x10, 16x14, 21x15, 25x15, 32x18 and any combination of the a/m matrices can be used within the restrictions imposed by a selected text profile.
(including national characters: German, Polish, Danish, Spanish, Swedish, Turkish, Portuguese, Greek, Czech, Slovak),
‑ Cyrillic: 5x5, 7x6, 9x7, 12x7, 12x9, 16x10, 25x19, 32x24 (including Ukrainian, Kazakh characters),
‑ Arabic,
‑ special,
‑ Armenian,
‑ Japanese,
‑ Chinese.
Bar codes ‑ 1-dimensional (1D) codes: Datalogic, Matrix, 2/5 5 Bars, 2/5 IATA, Interleaved, Code 39, EAN‑8, EAN‑13, EAN‑13 +EAN5, UPC‑A, UPC‑A EBS, UPC‑E, Kod 128, EAN‑128, Kod 128B, ITF8, ITF14.
‑ 2-dimensional (2D) code: Data Matrix ECC‑200 (an option).
Graphics ‑ edited with graphics editor.
‑ its maximum height is determined by a selected text profile.
Maximum print rate
for Speed=FAST printing parameter
- 2083 cps - 1 line 5x5,
- 1890 cps - 2 lines 5x5,
-   607 cps - 3 lines 5x5,
-   809 cps - 4 lines 5x5,
-   489 cps - 5 lines 5x5,
- 1785 cps - 1 line 7x4,
- 1247 cps - 2 lines 7x4,
-   728 cps - 3 lines 7x4,
-   792 cps - 4 lines 7x4,
-   709 cps - 1 lines 11x7,
-   304 cps - 2 lines 11x7,
-   312 cps - 1 line 16x9,
-    76 cps - 1 line 25x15,
-    31 cps - 1 line 32x18.
with 1 space row between characters.

Consumables
Type of ink pigment, based on methyl-ethyl ketone or ethanol
Ink color multicolor, provided that ink of one type only is used
*) note - the manufacturer reserves that: the range of available features, options and printer parameters may vary and depend on the option you have negotiated
Parameter Value

Physical properties
Housing stainless steel
Housing dimensions width: 300 mm,
height: 470 mm,
depth: 211 mm.
Printhead dimensions - straight:
  diameter Ø 40 mm, length 198 mm
- angular (option):
  diameter Ø 40 mm, length 127 mm, height 130 mm
LCD dimensions 5.7”/144.8 mm
Weight about 13.8 kg without fluids
IP Protection class Printer casing (excluding the printhead):
IP44 (standard),
IP54 (option).
Feeder cable length 2.2 m

Technical data *)
Number of print-heads 1
Printer position during printing vertical
Printhead position during printing any
Head cable ‑ head cable length: 3m,
‑ minimum cable bend radius:
75mm for static operation,
150mm for dynamic operation.
Distance from the printhead to an object from 0 to 30 mm
Connections - USB,
ETHERNET,
PHOTO: photodetector input,
SHAFT: shaft-encoder input,
‑ optional connections (e.g. RS-232).
Terminal a built-in terminal equipped with an air tight, splash proof, chemicals resistant alphanumerical keyboard and a big touch control LCD (touch screen)
Print release photodetector
other detectors can be connected, if required by a user
Timing of print columns ‑ internal generator,
‑ shaft-encoder.

Working conditions
Environment ‑ working temperature
from +5 to +40ºC (from +41 to +104ºF), for static operation,
from +15 to +40ºC (from +59 to +104ºF) for dynamic operation.
‑ relative humidity: to 90% without condensation.
Acceptable exposure to vibration and impacts ‑ vibration: max.: 1 g, max. 10 Hz.
‑ shocks: max. 1 g, max. 2 ms.
Power supply ‑ supply voltage: 100 ‑ 240 VAC, 50/60 Hz.
‑ max. current consumption (in normal working conditions): 0.65 ‑ 0.3 A.
Compressed air supply not required!!!
Required inactive time none; the device can run uninterruptedly for 24 hours

Specifications
Print height from 1.4 to 12 mm
Maximum print height
(MPH, the maximum height of a vertical row)
16 (or optionally 25 or 32) dots
Maximum number of texts ‑ about 1000 (standard).
‑ about 2000 (option).
Types of subtexts CHARACTER STRING,
GRAPHICS,
BAR CODE,
TEXT NAME.

Subtexts whose contents are:
‑ static,
‑ dynamic (so called special registers: counters, date, expiration date, time, shift identifier, external data, variable field, text contents).
Character matrices ‑Latin: 5x5, 7x4, 7x5, 9x5, 9x7, 11x7, 12x6, 12x7, 14x9, 16x9, 16x10, 16x14, 21x15, 25x15, 32x18 and any combination of the a/m matrices can be used within the restrictions imposed by a selected text profile.
(including national characters: German, Polish, Danish, Spanish, Swedish, Turkish, Portuguese, Greek, Czech, Slovak),
‑ Cyrillic: 5x5, 7x6, 9x7, 12x7, 12x9, 16x10, 25x19, 32x24 (including Ukrainian, Kazakh characters),
‑ Arabic,
‑ special,
‑ Armenian,
‑ Japanese,
‑ Chinese.
Bar codes ‑ 1-dimensional (1D) codes: Datalogic, Matrix, 2/5 5 Bars, 2/5 IATA, Interleaved, Code 39, EAN‑8, EAN‑13, EAN‑13 +EAN5, UPC‑A, UPC‑A EBS, UPC‑E, Kod 128, EAN‑128, Kod 128B, ITF8, ITF14.
‑ 2-dimensional (2D) code: Data Matrix ECC‑200 (an option).
Graphics ‑ edited with graphics editor.
‑ its maximum height is determined by a selected text profile.
Maximum print rate
for Speed=FAST printing parameter
- 2083 cps - 1 line 5x5,
- 1890 cps - 2 lines 5x5,
-   607 cps - 3 lines 5x5,
-   809 cps - 4 lines 5x5,
-   489 cps - 5 lines 5x5,
- 1785 cps - 1 line 7x4,
- 1247 cps - 2 lines 7x4,
-   728 cps - 3 lines 7x4,
-   792 cps - 4 lines 7x4,
-   709 cps - 1 lines 11x7,
-   304 cps - 2 lines 11x7,
-   312 cps - 1 line 16x9,
-    76 cps - 1 line 25x15,
-    31 cps - 1 line 32x18.
with 1 space row between characters.

Consumables
Type of ink pigment, based on methyl-ethyl ketone or ethanol
Ink color multicolor, provided that ink of one type only is used
*) note - the manufacturer reserves that: the range of available features, options and printer parameters may vary and depend on the option you have negotiated
No. Description Files to download
1 User Manual for the BOLTMARK®-series Printers.
Separate languages versions:
English, 20140422#2.2.
Polish, 20140422#2.2.
Spanish, 20140422#2.2.
French, 20140422#2.2.
Italian, 20140822#2.2.
Russian, 20140422#2.2.
Turkish, 20140613#2.2.
Chinese, 20140422#2.2.
The Manuals are provided in the PDF file format.

This editions of the document include most of the changes introduced to the EBS printers for software version 32_0A and the descriptions contained therein correspond to the printers that are equipped with this software version.
Number of files: 8
2 User Manual for the EBS-6800P BOLTMARK® Printers.
(Supplement to the BOLTMARK®-series Printers User Manual)
Separate languages versions:
English, 2016/10/20#1.0EN.
Polish, 2016/10/20#1.0PL.
German, 2017/09/06#1.1DE.
Spanish, 2016/10/20#1.0ES.
French, 2016/10/20#1.0FR.
Italian, 2016/10/20#1.0IT.
Russian, 2016/10/20#1.0RU.
Turkish, 2016/10/20#1.0TR.
Chinese, 2016/10/20#1.0ZH.
The Manuals are provided in the PDF file format.

This editions of the document include most of the changes introduced to the EBS printers for software version 35_1A and the descriptions contained therein correspond to the printers that are equipped with this software version.
Number of files: 9
3 Basic Manual for the BOLTMARK®-series Printers.
Separate languages versions:
English, 20140417#2.2.
Polish, 20140417#2.2.
Czech, 20140417#2.2.
Portuguese, 20140417#2.2.
Romanian, 20140417#2.2
Danish, 20140417#2.2.
Dutch, 20140417#2.2.
The Manual is provided in the PDF file format.

This editions of the document include most of the changes introduced to the EBS printers for software version 32_0A and the descriptions contained therein correspond to the printers that are equipped with this software version.
Number of files: 7

In order to view the PDF files, that are available on our website, we recommend to install Adobe® Reader® on your computer. This is available for FREE and you can download it from the Adobe web site by clicking here >>>